Posts Tagged ‘ Amplifier ’

Peak Power Capacity: 150 W X 4 +(300W X 1) RMS Power Capacity: 75 W X 4 +(300W X 1) MOSFET Power And Output Stages Class-D Amplifier Design Product Description 5-channel car amplifier 75 watts RMS x 4 + 300 watts RMS x 1 at 4 or 2 ohms 150 watts RMS x 2 + 300 watts RMS x...
Read more »

RMS Power Per Channel Into 4 Ohms: 300W X 1 RMS Power Per Channel Into 2 Ohms: 500W X 1 2 Single Voice Coil Subs Or 1 Dual Voice Coil Works Best Number 1 Rated Amp In The US Product Description Amplifier Type: Class-D (Digital) Channel Design: 1 Channel (Mono) Thermal Control: Thermal Management Control Power Supply: DC-DC PWM...
Read more »

Universal Interface™ Factory Head-Unit Interface Common-Sense Turn-on Built-in Variable Electronic Crossover Discrete Darlington Output Matrix Pre-amp Outputs with Crossover Product Description Universal Interface™ Factory Head-Unit Interface * Common-Sense Turn-on * Built-in Variable Electronic Crossover * Discrete Darlington Output Matrix * Pre-amp Outputs with Crossover * Power Output, 4 Ohms: 75W x 2 * Total Harmonic Distortion: 0.1% * Frequency Response: 20Hz-20kHz * Signal-to-Noise Ratio: >100dB… More >> JBL P-7520...
Read more »

RMS Power Per Channel Into 4 Ohms: 50W X 4 (1% THD) RMS Power Per Channel Into 2 Ohms: 75W X 4 Brigded 4 Ohms: 150W X 2 Number 2 Rated Amp In US Product Description Power up your system with Alpines V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for...
Read more »

40W x 2 Automotive Power Amplifier Built-in Electronic Crossover Selectable Bass Boost Floating-Ground Factory-Head Unit Interface Triple-Threat Protection Circuitry Product Description40W x 2 Automotive Power Amplifier * Built-in Electronic Crossover * Selectable Bass Boost * Floating-Ground Factory-Head Unit Interface * Triple-Threat Protection Circuitry * 2-Ohm Stable * Power Output, 4 Ohms: 40W x 2 * Peak Power Output: 200W * Total Harmonic Distortion: 0.10% * Frequency Response: 10Hz-20kHz...
Read more »

Channel car amplifier-four Power: 100 watts RMS x 4 Max. Power: 200 watts RMS x 2 Mosfet power Class D amp design Product Description Brand new Alpine PDX-4.100 4 channel amplifier with mosfet power and Class D design…. More >> Alpine PDX-4.100 4/3/2 Channel Digital Amplifier
Read more »

Total Output Power: 100 Watts RMS (4 Ohms, Bridged) Discrete High-Current Output Devices Simultaneous Stereo/Bridged Operation Switchable High-Pass/Low-Pass Crossover Crossover Frequencies: 80Hz Low-Pass, 100Hz High Pass Product Description Total Output Power: 100 Watts RMS (4 Ohms, Bridged) * Discrete High-Current Output Devices * Simultaneous Stereo/Bridged Operation * Switchable High-Pass/Low-Pass Crossover * Crossover Frequencies: 80Hz Low-Pass, 100Hz High Pass * Gold-Plated input Connectors * Low Noise Inputs...
Read more »

65W x 2 Automotive Power Amplifier Built-in Electronic Crossover Selectable Bass Boost Floating-Ground Factory-Head Unit Interface Triple-Threat Protection Circuitry Product Description 65W x 2 Automotive Power Amplifier * Built-in Electronic Crossover * Selectable Bass Boost * Floating-Ground Factory-Head Unit Interface * Triple-Threat Protection Circuitry * 2-Ohm Stable * Power Output, 4 Ohms: 65W x 2 * Peak Power Output: 300W * Total Harmonic Distortion: 0.10% * Frequency Response: 10Hz-20kHz...
Read more »

High-Speed Switching Power Supply High-Current MOSFET Output Circuit Continuously Variable Electronic Crossover 4-Volt Head-Unit Compatible Gold-Plated Power, Speaker and Input Connectors Product Description High-Speed Switching Power Supply * High-Current MOSFET Output Circuit * Continuously Variable Electronic Crossover * 4-Volt Head-Unit Compatible * Gold-Plated Power, Speaker and Input Connectors * Stable into 2 Ohms * Maximum Power Output: 125W x 2 * Power Output, 4 Ohms: 50W x...
Read more »

Peak Power Capacity: 600W Switchable Subsonic Filter (15 Or 30 HZ) Preamp-level Inputs And Outputs Variable Low-pass Filter (50-200 Hz, 24 DB/octave) Product Description Mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) CEA-2006 compliant Stackable installation design with front-panel controls Variable low-pass filter (50-200 Hz, 24 dB/octave) Switchable...
Read more »